Tray Dryer:


Tray Dryer

The dryer is of double walled construction fabricated in heets and main frame comprising of fabricated M.S. angles and sections.

Dryers come in two versions of floor mounting type and with steel bottom. The internal walls of the dryer can be provided in Mild Steel/Stainless Steel Sheets.

Doors: Double walled doors are provided withhandle locks and leak proof liner to prevent hot air leaking out of the dryer.

Insulation: Fibre glass impregnated glass wool pads/mineral wool pads of appropriate thickness to suit the internal temperature are provided for insulation.

Heating Sytem :A choice of electrical / steam heating/thermic fluid heating for drying air is offered.

Electrical Heaters :: Finned electrical heater bank is provided on a eplaceable frame which is accessiable for replacement of the heaters /maintenance.

Steam Coils / Thermic Fluid Coils :Steam Coils with finnes of optimum surface area are provided depending on the temperature requirements.

Accessories for Steam Coils : Steam inlet valve pressure relief valve and steam trap are provided.

Accessories for Thermic Fluid coils : Inlet valve and electrical solenoid are provided.

Circulation Fan : Variable pitch air circulation fan to handle the drying air are driven by electrical motors. Flap type air dampers are provided to control the inlet air and exhaust of vapour laiden circulating air.

Temperature Control : An electronic temperature indicator controller is provided to maintain the desired internal temperature of dryer - (1) The controller controls switching on and off of the electrical heaters in case of electrical heater. (2) The controller controls a solenoid valve in case of steam and thermic fluid coils

Control pannel : An electrical switch fuse unit is provided alongwith contractors for fan motor which are interlocked with heaters / solenoids.A volt meter and ammeter are provided alongwith pilot lamp for indications of incoming phases.

Trolley : Mild Steel / Stainless Steel / Aluminium trolley with four caster wheels accommodating 48 trays of 400 mm width x 800 mm length x 32 mm height are provided for loading the trays in the dryer.

Trays Products trays of size 400 mm width x 800 mm length x 32 mm height can be provided in Galvanize Iron Sheet / Stainless Steel Sheet / Mild Steel Sheet.

PAINT : The dryer is painted internally with heat reflecting aluminum paint & externally with hammer tone paint.


SPECIFICATIONS

MODEL HTD - 24 HTD - 48 HTD - 96 HTD - 144 HTD - 192
CAPACITY 24 TRAYS 48 TRAYS 96 TRAYS 144 TRAYS 192 TRAYS
INTERNAL DIMENSIONS 1750 X 190 X1100 H 2350 X 1000 X 1750 H 3600 X 1000 X 1750 H 2350 X 2750 X 1850 H 3600 X 1850 X 1850 H
DOORS 1 1 2 3 4
FANS 1 1 2 2 4
MOTOR ( KW / HP ) 0.37 / 0.5 0.75 / 1.0 2 X 
( 1.5 / 2.0 )
2 X 
( 2.2 / 3.0 )
4 X
( 1.5 X 2.0 )
TEMP Co

HEATING LOAD ( KW )

100 6 12 18 27 36
150 7.5 12 21 30 39
200 9 15 24 33 42
250 10.5 18 27 36 45
300 12 21 30 39 48
INSULATION ( Thickness in mm )
100 50 50 75 75 75
150 50 75 75 75 75
200 100 100 150 150 150
250 100 125 150 150 150
300 100 150 150 150 150
MORE INFORMATION

Contact Sales: Mobile: +919422111357, +918830463049

Contact Email: hecraftngp@gmail.com