Jacketed Reaction Vessels:
Jacketed Reaction Vessels are manufactured in all Stainless Steel / Mild Steel construction with or without jacket with paddle / anchor / turbine agitators or with side entry agitator with heating / cooling coils & capacities up to 15000 liters.
The reaction vessel are suitable for pressure / vacuum conditions. They are provided with either stuffing box & gland type of shaft seal or with mechanical seals.
A jacket is a cavity external to the vessel that permits the uniform exchange of heat between the fluid circulating in it and the walls of the vessel. There are several types of jackets, depending on the design
Detailed specification of the equipment shall be provided on request.
Half-Pipe Coil Jackets:
Jackets can be applied to the entire surface of a vessel or just a portion of it. For a vertical vessel, the top head is typically left unjacketed. Jackets can be divided into zones, to divide the flow of the heating or cooling medium. Advantages include: ability to direct flow to certain portions of the jacket, such as only the bottom head when minimal heating or cooling is needed and the entire jacket when maximum heating or cooling is required; ability to provide a higher volume of flow overall (zones are piped in parallel) because the pressure drop through a zone is lower than if the entire jacket is a single zone.
Jacketed vessels can be employed as chemical reactors (to remove the elevated heat of reaction) or to reduce the viscosity of high viscous fluids
Contact Sales: Mobile: +919422111357,+918830463049
Contact Email: email@example.com