Bulk Loading System:
10 Ton Capactiy Bulk Loading System with Operaters Cabin
|Models||Capacity||Water Tank||Air Tank||Mixer||Final Product Pump|
|Bulk Loading System BLPT-12.5||12.5 M.T.||300 L||80 L||YES||YES|
|Bulk Loading Heavy ANFO, ANFO BLPTAHA-12.5||12.5 M.T.||300 L||80 L||YES||YES|
|Bulk Loading System BLPT-10||10.0 M.T.||250 L||80 L||YES||YES|
|Bulk Loading Heavy ANFO,ANFO BLPTAHA-10||10.0 M.T.||250 L||80 L||YES||YES|
|Bulk Loading System||6.0 M.T.||150 L||50 L||YES||YES|
|Bulk Loading System BLPT-4||4.0 M.T.||150||50 L||YES||YES|
|ANFO LOADER||10.0 M.T.||NIL||NIL||YES||NO|
|ANFO LOADER ALT-7||7.0 M.T.||NIL||NIL||YES||NO|
|ANFO LOADER ALT-5||5.0 M.T.||NIL||NIL||YES||NO|
6 Ton Capacity Bulk Loading System
|Models||Capacity||Hose Reel||Hose Guide||Charging Hose||Oil Cooler|
|Bulk Loading System BLPT-12.5||12.5 M.T.||YES||YES||2 1/2"||YES|
|Bulk Loading Heavy ANFO, ANFO BLPTAHA-12.5||12.5 M.T.||YES||YES||2 1/2"||YES|
|Bulk Loading System BLPT-10||10.0 M.T.||YES||YES||2 1/2"||YES|
|Bulk Loading Heavy ANFO,ANFO BLPTAHA-10||10.0 M.T.||YES||YES||2 1/2"||YES|
|Bulk Loading System BLPT-6||6.0 M.T.||YES||NO||2"||YES|
|Bulk Loading System BLPT-4||4.0 M.T.||YES||NO||2"||YES|
|ANFO LOADER ALT-10||10.0 M.T.||NO||NO||NO||YES|
|ANFO LOADER LT-7||7.0 M.T.||NO||NO||NO||YES|
|ANFO LOADER LT-5||5.0 M.T.||NO||NO||NO||YES|
All these units are mounted on trucks, having capacities ranging from 5 – 15 tons. The Units are fabricated on skid & the skids are mounted on truck chassis.
The system consists of truck mounted storage and processing equipment for carrying ingredients from base plant and mixing the ingredients at the site in required proportion.They are pumped out as final product at the point of use.The system design permits addition of various additives such as sensetisers, gassing agents etc.as per process requirements.
The system is powered by Hydraulics. The hydraulic drive is powered by the truck internal combustion engine through a power take-off shaft. The system design ensures safety of operation and flexibility of process control parameters such as products, proportions & discharge rate.The final product after processing ingredients is pumped directly into the drilled holes in the mines through an anti static hose which is wound on a Hose Reel fitted on the pump truck.
The Hose can be immersed right upto the entire depth of mine hole and subsequent withdrawal rate and charging rate can be pre programmed. This facility ensures even charging of explosive and avoids agglomeration at the bottom of pit. Thus ensuring optimum usage of explosive.
The entire module is designed in such a fashion to ensure easy mobility and safe maneuverability of fully loaded truck absolutely keeping in mind norms of road safety and regulations.